Note: The ability to connect to EID hardware is only available on Individual Animal Management. For further information on this feel free to check out our Plan and Pricing page or contact the team.
After reading this article, you can also visit our youtube library for video support for hardware connections.
The Tru-Test S3 is an indicator that can connect via bluetooth to the AgriWebb Mobile App. It can also connect to a Stick Reader (such as a Tru-Test SRS2i) via bluetooth.
The S3 can only connect via Bluetooth to Android & Apple iOS devices.
To see the full list of AgriWebb supported EID Readers see here.
Your Tru-Test S3 may require a software update and it is recommended that you ensure you are on the most recent version. You can download the latest version here.
Setup Considerations
The S3 has 2 physical male connectors (Amphenol plug) that can connect to your Load Bars. It can also connect to a panel reader or stick reader through bluetooth.
Note: The S3 can ONLY send weight information to AgriWebb. However you can still get EIDs sent to AgriWebb by connecting an EID Reader separately.
Setup
You can use either a bluetooth Panel Reader or bluetooth stick reader in the following diagram.
Connect the EID Reader to AgriWebb mobile via Bluetooth.
Enable Bluetooth Scan on the EID Reader and connect within your phone settings
Then navigate to the AgriWebb Mobile App > Menu > Hardware Connections > Select your EID reader (e.g. SRS2).
Connect your AgriWebb Mobile App to the S3.
Connect directly to the S3 from within your phone settings and then AgriWebb Mobile App.
AgriWebb Mobile App > Menu > Hardware Connections > Select S3.
Start your session on your reader and AgriWebb.
Steps for starting a Live Session can be found here.
Helpful Articles